Rockwell Automation 1746-HSCE2 Multi-Channel High Speed Counter Module - Manual (Page 9)

1 Publication 1746-UM002B-EN-P - August 2004
Summary of Changes
The information below summarizes the changes to this manual since
the last printing.
To help you find new information and updated information in this
release of the manual, we have included change bars as shown to the
right of this paragraph.
New Information The table below lists sections that include new information.
For this new information See page(s)
Note on limitations of rate value calculation at input frequencies
below 60 Hz. 2-11
Clarified operation of Module Fault (MFLT) bit 2-17
Updated resistor information in single-ended wiring diagrams 3-9 and 3-10
Clarified programming cycle 4-2
Modifications to the COP instruction example for reading and writing
floating point data 4-4
Corrected bit identification in Output State Byte 4-22
Example showing how to activate debug mode 5-10
Corrected bit identification table for Program Ranges Block C-2