Rockwell Automation 1746-HSCE2 Multi-Channel High Speed Counter Module - Manual (Page 92)

Publication 1746-UM002B-EN-P - August 2004
5-10 Start Up, Operation, Troubleshooting, and Debug Mode
EXAMPLE
Activating Debug Mode
1. Clear the output image table.
2. Set the required bits in the block that will be
echoed back.
3. Set the debug mode bit.
4. Set the transmit bit.
Once the steps above are complete, you can
reference the input image words to reflect the
block’s configuration.
NOTE: Only the first eight words in the input image
have meaning in Class 4.