Brandmotion 2000-3811 - Manual (Page 10)

Section 4: Scion xD, 2011 – Current
2000-3811 Instructions 8-1-13.Doc Page 10 of 54
1. Ensure all radio functions are working properly, return all
Treble, Bass, Fade, and Balance to neutral settings and
remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions, place
shifter in the N (neutral) position and set parking brake.
3. Loosen the negative battery cable bolt with 10mm socket.
Remove negative battery cable from terminal and position
away from battery.
4. Disengage the 4 clips and 3 claws and remove the
instrument cluster finish center panel.
5. Remove the 4 bolts and remove the radio with bracket.
Disconnect the connectors.
6. Disengage the claw and disconnect the glove
compartment door stopper. Slightly flex the upper part of
the glove compartment door to release the 2 stoppers
and open the glove compartment door until it becomes
horizontal.
7. Pull the glove compartment door out horizontally to
disengage the 2 hinges and remove the glove
compartment door. NOTICE: Pull the glove compartment
door out horizontally; otherwise, installation failure
caused by excessive play around the hinge will result.
IMPORTANT: DPS is NOT compatible
with factory JBL audio systems.