Brandmotion 2000-3811 - Manual (Page 2)

INSTALLATION
INSTRUCTIONS
2000-3811 Instructions 8-1-13.Doc Page 2 of 54
TABLE OF CONTENTS
Pages
Section 1: Scion FR-S 3
Section 2: Scion tC 4 – 6
Section 3: Scion xB 7 – 9
Section 4: Scion xD 10 – 12
Section 5: Toyota 4-Runner 13 – 14
Section 6: Toyota Avalon 15 – 17
Section 7: Toyota Camry 18 – 21
Section 8: Toyota Corolla 22 – 25
Section 9: Toyota FJ Cruiser 26 – 27
Section 10: Toyota Highlander 28 – 29
Section 11: Toyota Matrix 30 – 31
Section 12: Toyota Prius 32 – 34
Section 13: Toyota RAV4 35 – 37
Section 14: Toyota Sienna 38
Section 15: Toyota Tacoma 39 – 42
Section 16: Toyota Tundra
Toyota Sequoia
43– 46
Section 17: Toyota Venza 47– 48
Section 18: Toyota Yaris 49 – 52
Section 19: Scion iQ 53 – 54
General Preparation:
1. Park vehicle on level ground and secure with tire chucks.
2. Ensure all radio functions are working properly before disassembly.
3. Record any pre-set radio stations if desired as these may be lost when power is disconnected.
4. Remove any CDs to avoid possible jam.
5. Return all Treble, Bass, Fade, and Balance to neutral setting. The DPS is designed to provide
the best audio experience at the neutral settings. You can, however, adjust them to meet your
desired experience.
6. For vehicles equipped with automatic transmissions, place shifter in the N (neutral) position
and set parking brake.
7. Use a 10mm wrench to loosen the negative battery cable bolt. Remove negative battery cable
from terminal and position away from battery.