Brandmotion 2000-3811 - Manual (Page 22)

Section 8: Toyota Corolla, 2010 – Current
2000-3811 Instructions 8-1-13.Doc Page 22 of 54
1. Ensure all radio functions are working properly, return
all Treble, Bass, Fade, and Balance to neutral settings
and, remove any CDs to avoid possible jam before
disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set parking
brake.
3. Loosen the negative battery cable bolt. Remove
negative battery cable from terminal and position
away from battery.
4. Using a Plastic Trim Removal Tool, disengage the 3
claws and clip, and then remove the lower left IP
finish panel.
5. Using a Plastic Trim Removal Tool, disengage the 3
claws and clip, and then remove the lower right IP
finish panel.
6. Turn the shifter knob counterclockwise and remove
the shift lever knob.
7. Disengage the 2 claws and 2 clips, disengage the
guide, and remove the center cluster finish panel
assembly.
8. Disengage 4 claws retaining IP cover. Disconnect
each connector and remove IP cover.
9. Remove cup holder panel.