Brandmotion 2000-3811 - Manual (Page 23)

Section 8: Toyota Corolla, 2010 – Current
2000-3811 Instructions 8-1-13.Doc Page 23 of 54
10. Open console door and remove console box carpet.
11. Apply protective tape to the area shown in the
illustration. Repeat process for right side.
12. Insert Plastic Trim Removal Tool and slide it toward
the clip. Pull the tool with both hands to disengage
the clip as shown. Disengage the 2 claws and clip,
and remove the left instrument panel finish panel
end. Repeat process for right side.
13. Disengage the 2 claws, 4 clips, and 2 guides.
Disconnect the connectors and remove the center
instrument panel register assembly.
14. Remove 4 radio retaining bolts. Pull the radio with
bracket toward the rear of the vehicle and
disengage the 4 clips.
15. Pull radio with bracket toward the rear of the vehicle
and disengage the 4 clips. Disconnect each
connector and remove the radio with bracket.
Disconnect each connector and remove radio.