Brandmotion 2000-3811 - Manual (Page 35)

Section 13: Toyota RAV4, 2010 – Current
2000-3811 Instructions 8-1-13.Doc Page 35 of 54
1. Ensure all radio functions are working properly,
return all Treble, Bass, Fade, and Balance to neutral
settings and, remove any CDs to avoid possible jam
before disassembly.
2. For vehicles equipped with automatic transmissions,
place shifter in the N (neutral) position and set
parking brake.
3. Loosen negative battery cable bolt. Remove
negative battery cable from terminal and position
away from battery.
4. Using a Plastic Trim Removal Tool, disengage the 3
clips and 2 claws from the left IP finish panel and
remove the panel.
5. Using a Plastic Trim Removal Tool, Disengage the 3
clips and 2 claws from the right IP finish panel and
remove the panel.
6. Remove the 4 radio retaining bolts on sides of radio.
Detach the 4 claws from radio faceplate. Disconnect
all connectors and remove radio with bracket.
7. Turn shifter knob counterclockwise and remove.
8. Place protective tape as shown. Using a Plastic Trim
Removal Tool, detach the 4 clips and remove left
console upper panel garnish.
9. Place protective tape as shown. Using a Plastic Trim
Removal Tool, detach the 4 clips and remove right
console upper panel garnish.