Metrohm 894 Professional CVS - Manual (Page 32)

3.2 Equipping the RDE measuring head
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭
894 Professional CVS
Figure 14 Fastening the drive belt
NOTE
Make sure that the drive belt does not rub against the driving axle
or surrounding components (tubings, cables, etc.).
5 Connecting the working electrode
Plug the electrode cable (4-7) with the WE marking on the plug onto
the metal contact of the driving axle.