Figure 31, Connecting an external pump using the remote cable, Figure 32 – Metrohm 894 Professional CVS User Manual
Page 61: Connecting an external pump to the tower
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
894 Professional CVS
■■■■■■■■
51
Figure 31
Connecting an external pump using the remote cable
3 Connect the two plugs of the cable (6.2141.300) for the pump con-
nectors to the tower of the Sample Processor.
Make sure that the markings on the cables match the markings on
the tower ("Ext. Pump 1" and "Ext. Pump 2").
Ext. Pump 1
Ext. Pump 2
Figure 32
Connecting an external pump to the tower
Advertising