4 connecting devices electrically, 1 connecting the 894 professional cvs, Connecting devices electrically – Metrohm 894 Professional CVS User Manual
Page 48: Connecting the 894 professional cvs, Figure 29, Connecting an fep tubing to the dosing unit (vms)
3.4 Connecting devices electrically
■■■■■■■■■■■■■■■■■■■■■■
38
■■■■■■■■
894 Professional CVS
1
Figure 29
Connecting an FEP tubing to the dosing unit (VMS)
1 Screw the tubing nipple of the FEP tubing (e.g. 6.1805.120) to port 1
of the dosing unit containing VMS.
3.4
Connecting devices electrically
3.4.1
Connecting the 894 Professional CVS
The 894 Professional CVS is connected to the power supply with the
power supply cable and to the PC with the controller cable. Both cables
are supplied.
WARNING
An incorrect supply voltage can damage the instrument. Operate the
instrument only with the supply voltage specified for it.
Connecting to the power supply and the PC
Proceed as follows:
1 Connect the 894 Professional CVS to the power supply with the
power supply cable (6.2122.0x0).
2 Connect the controller cable (6.2151.000) to the "Controller" con-
nector of the 894 Professional CVS.