Metrohm 894 Professional CVS - Manual (Page 56)

3.4 Connecting devices electrically
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
46 ￭￭￭￭￭￭￭￭
894 Professional CVS
Connecting an 800 Dosino with dosing unit to an 846 Dos-
ing Interface
Proceed as follows:
1 Connect the connection cable of the 800 Dosino to one of the four
MSB connectors on the 846 Dosing Interface.
The following dialog window is displayed:
2 Confirm with OK.
Initializing a dosing unit in viva
Proceed as follows:
1 Select the 846 Dosing Interface in the device table of the Configura-
tion section of the program.
2 In the device table, click on the Edit button and select Initialize.
If you have connected a brand-new dosing unit, the following dialog
window is displayed:
Or:
If you have connected a dosing unit that has been previously config-
ured, then the following dialog window is displayed: