Metrohm 894 Professional CVS - Manual (Page 83)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Operation and maintenance
894 Professional CVS
￭￭￭￭￭￭￭￭ 73
Proceed as follows:
1 Tilt the measuring head arm up.
2 Hold the measuring head with both hands, push the metal clip on
the bottom of the measuring head arm upwards and pull the mea-
suring head away.
Figure 45 Removing the measuring head
3 Place the measuring head with electrodes and tubing in the park sta-
tion.
NOTE
If the measuring head is not used for an extended period, then the
reference electrode must be removed from the measuring head
and stored separately. Observe the notes on maintenance and care
in the electrode leaflet.
4
CAUTION
Do not apply pressure to the drive disk on the connector plate of
the measuring head arm, as this could damage the stirrer motor.