Metrohm 894 Professional CVS - Manual (Page 60)

3.4 Connecting devices electrically
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50 ￭￭￭￭￭￭￭￭
894 Professional CVS
5 Change the suggested instrument name if required.
6 Confirm with OK.
The instrument will be automatically listed in the device table of the
Configuration section of the program.
3.4.4 Connecting an external pump
If solutions are to be added or aspirated via an external pump, we recom-
mend using the 843 Pump Station with membrane pump. The 843 Pump
Station is connected to the tower of the Sample Processor with the
6.2141.300 cable.
Connecting an 843 Pump Station
Proceed as follows:
1 Connect the 843 Pump Station to the power supply with the power
supply cable (6.2122.0x0).
2 Insert the remote plug of the cable (6.2141.300) into the "Remote 2"
socket of the 843 Pump Station.