Metrohm tiBase 1.0 Manual - Manual (Page 101)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Configuration
tiBase 1.0 ￭￭￭￭￭￭￭￭ 93
3.2.3.2.3 Edit backup directory
Dialog window: Configuration ▶ Tools ▶ Program administration ▶ Backup direc-
tories ▶ [Edit] ▶ Edit backup directory
Name
Name for the backup directory.
Input 50 characters
Note
The Default backup directory generated during installation cannot be
renamed.
Directory
Entry or selection (with ) of the path for the backup directory.
Input 1000 characters
Note
If the backup directory is on a network drive the saving date should be
added manually to the Backup name because the saving date informa-
tion is not available when the directory is restored.
Note
Make sure that you have read and write access rights on the selected
directory.
3.2.3.3 Clients
Tab: Configuration ▶ Tools ▶ Program administration ▶ Clients
Table with information about the computers on whichtiBase is installed.
The table cannot be edited. With a click on the column title the table can
be sorted according to the selected column in either increasing or decreasing
sequence.
Client ID
Shows the ID for the client that has been entered for the client/server instal-
lation.