Metrohm tiBase 1.0 Manual - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiBase 1.0 ￭￭￭￭￭￭￭￭ 31
￭ Determination of a blank value which will be taken into account during
the content determination of the sample.
￭ Determination of the content of a standard solution, which will be taken
into account during the content determination of the sample.
2.4.3.9 Alphabetical command overview
￭ BRC
Coulometric bromine number determination
￭ CAL Cond
Determination of cell constants of conductivity sensors with the aid of a
known standard solution.
￭ CAL MEAS Conc
Measuring of calibration buffers for the calibration of ion-selective elec-
trodes.
￭ CAL MEAS pH
Measuring of calibration buffers for the calibration of pH sensors.
￭ DET pH
Potentiometric pH measurement with pH electrodes (measured quantity
pH).
￭ DET U
Potentiometric voltage measurement with metal electrodes (measured
quantity voltage U).
￭ DET Ipol
Voltametric measurement with selectable polarization current (measured
quantity voltage U).
￭ DET Upol
Amperometric measurement with selectable polarization voltage (meas-
ured value current I).
￭ DOS pH
Dosing of a specified volume with a solution (measured quantity pH)
￭ DOS U
Dosing of a specified volume with a solution (measured quantity voltage
U).
￭ KFC
Coulometric Karl Fischer titration with voltametric measurement.
￭ KFT Ipol
Volumetric Karl Fischer titration with voltametric measurement (selecta-
ble polarization current).
￭ KFT Upol
Volumetric Karl Fischer titration with amperometric measurement (select-
able polarization current).
￭ MEAS Conc
Concentration measurement (direct measurement).
￭ MEAS Cond
Conductivity measurement.