Metrohm tiBase 1.0 Manual - Manual (Page 90)

3.2 Administration ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
82 ￭￭￭￭￭￭￭￭ tiBase 1.0
User
Short name of new user that must be used to log in at program start. After
the name has been entered a Start password must be issued with which
the user is entered in the list of users.
Input 24 characters
3.2.1.3.3 Set start password
Dialog window: Configuration ▶ Tools ▶ User administration ▶ [Set start pass-
word] ▶ Set start password
Using the [Set start password] button in the dialog window User admin-
istration a start password can be issued for the selected user. It is enabled
only for newly added users or for those who have once again achieved
activated status. The dialog window Start password opens:
Start password
Enter a new start password. Password options are not used for the start
password.
Input 50 characters
Confirm password
Confirms the start password.
Input 50 characters
3.2.2 Security settings
3.2.2.1 Security settings
Dialog window: Configuration ▶ Tools ▶ Security settings
Overview
In the dialog window Security settings the parameters for log-in, pass-
word protection and electronic signatures can be configured.
With client/server systems the security settings are globally valid for all con-
nected clients.
Security settings can be exported and imported. This means that these set-
tings can be exchanged between different client/server systems.
The security settings can be put out as PDF file using the menu item
File
▶ Print (PDF) ▶ Security settings.
Tabs
The security settings are configured on the following tabs:
￭ Login/Password protection
Settings for login and password protection.