Metrohm tiBase 1.0 Manual - Manual (Page 206)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
198 ￭￭￭￭￭￭￭￭ tiBase 1.0
– <remotePortName> ... </remo-
tePortName> Number of the MSB connector the Remote Box was con-
nected to.
– <remoteType> ... </remote-
Type> Type of Remote Box.
</Port>
</devicePorts>
</Device>
</usedDevices>
4.4.4.3.9 XML export - Sensor data
XML export
– <usedSensors dynamic=""> Sensor data
– <Sensor> Data on sensor.
<subtype val="" /> Type of sensor:
XML_SENSOR_OTHER = Other sensor
XML_SENSOR_PH = pH sensor
XML_SENSOR_ION = ISE sensor
XML_SENSOR_METAL = Metal sensor
XML_SENSOR_TEMP = Temperature sensor
XML_SENSOR_COND = Conductivity sensor
– <sensorData> Data on sensor.
<sensorName val="" /> Sensor name.
<sensorType val="" /> Sensor type.
<sensorOrderNo val="" /> Order number of sensor.
<sensorSerialNo val="" /> Serial number of sensor.
<sensorInitDate val="" /> Date on which the sensor was used for the first time.
<sensorSlope val="" /> Slope of the sensor.
<sensorPh0 val="" /> Electrode zero point of the pH sensor.
<sensorIonVa val="" /> Ion (valency) of the ISE sensor.
<sensorE0 val="" /> Electrode zero point of the sensor.
<sensorC val="" /> Blank value of the ISE sensor.
<sensorCalTemp val="" /> Calibration temperature.
<sensorCalDate val="" /> Calibration date.