Metrohm tiBase 1.0 Manual - Manual (Page 319)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 How to proceed?
tiBase 1.0 ￭￭￭￭￭￭￭￭ 311
Note
Data that is not present in the export file cannot be selected.
6 Click on [OK].
The import is started and the selected configuration data is imported.
5.4.4 Backing up configuration data
How to proceed?
Note
It is strongly recommended that the configuration database be backed up
periodically.
Backing up configuration data manually
1 Select program part Configuration.
2 Click on the menu item File ▶ Backup ▶ Manually.
The dialog window Backup configuration data manually opens.
3 Select the directory for the backup in the field Backup directory.
4 Select or enter the name for the Backup file. If an existing backup file
is selected it will be overwritten.
Note
If the backup directory is on a network drive, the backup date should
be added manually to the Backup name because the backup date
information is not available when the directory is restored.
5 Click on [Start].
The manual backup is started and the configuration database is backed
up to the selected directory.