Metrohm tiBase 1.0 Manual - Manual (Page 36)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 ￭￭￭￭￭￭￭￭ tiBase 1.0
1) HNP = Half neutralization potential
2.4.3.5 Result variables
Dialog window: Formula Editor ▶ Variables
Result variables are method-specific and are defined in the CALC command
of the method. The Variables field of the Formula editor lists all Result
variables which are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'
You can select the method variables directly in the formula editor under
Variables
▶ Result Variables in order to avoid syntax errors.
Result variables
Variable
name
(PC-Control)
Variable
name
( tiBase 1.0 )
Description Command
.R1 to .R9 [.VAL] Result value ( .VAL optional;
number) CALC
SSA# .ASD Absolute standard deviation for
the result (number) CALC
SMN# .MNV Mean value of the result (number) CALC
SNR .NSR Statistics actual counter for the
result (number) CALC
SSD .NST Statistics setpoint counter for the
result (number) CALC
SSR# .RSD Relative standard deviation for the
result (number) CALC
SNT .STS Statistics status for the result
(number 1 = Statistics on, 0 = Sta-
tistics off) CALC
#C.R# unit .UNI Result unit (Text) CALC
2.4.3.6 Determination variables
Dialog window: Formula Editor ▶ Variables
Determination variables are general variables that are generated in the
method run. They are not assigned to individual commands. The Varia-
bles field of the Formula editor lists the determination variables which
are available for the current method, sorted according to name.
Syntax
'DV.Variable name'