Metrohm tiBase 1.0 Manual - Manual (Page 104)

3.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
96 ￭￭￭￭￭￭￭￭ tiBase 1.0
User administration
on | off (Default value: on)
Exports saved user administration (see Chapter 3.2.1.1, page 74).
[OK]
The dialog window Save for saving data opens, in which the name and
directory for the export file must be entered. The selected configuration data
is then saved in a file with the extension .mcfg.
3.3.1.2 Import configuration data
Dialog window: Configuration ▶ File ▶ Import… ▶ Import configuration data
With File ▶ Import... and after selection of the file *.mcfg to be imported,
the dialog window Import configuration data opens, in which the parts
of the configuration database present in the export file can be selected for
import:
Note
Data that is not present in the export file cannot be selected.
Configuration views
on | off (Default value: on)
Imports saved configuration views (see Chapter 4.1.7, page 115).
Database views
on | off (Default value: on)
Imports saved database views (see Chapter 4.1.7, page 115).
Control chart templates
on | off (Default value: on)
Imports saved control card templates (see Chapter 4.4.3.1, page 169).
Curve overlay templates
on | off (Default value: on)
Imports saved curve overlay templates (see Chapter 4.4.2.1, page 164).