7 determination overview - data record selection, 8 determination overview - functions, Overview of functions – Metrohm tiBase 1.0 Manual User Manual
Page 213
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiBase 1.0
￭￭￭￭￭￭￭￭
205
4.5.1.7
Determination overview - Data record selection
Subwindow: Database
▶ Determination overview
The determinations selected in the table are shown in turquoise, the
focused determination whose data is shown in the other Subwindows is
indicated by an arrow in front of the line number. When a database is
opened the first determination is always selected and focused.
The following possibilities are available for the selection of determinations
in the determination table:
￭
Single determinations
Single determinations are selected by clicking on them with the mouse
within the line (including line number). This determination, whose data
is shown in the other opened subwindows, is now focused and receives
an arrow in front of the line number.
￭
Several determinations in sequence
In order to select several determinations in sequence the required range
can be selected with the left mouse button pressed down. It is also pos-
sible to select a range with a click on the first determination and [Shift]
& click on the last determination. The last determination to be selected
receives the focus.
￭
Several determinations not in sequence
In order to select several determinations not in sequence the individual
determinations must be selected with the Ctrl key and the left mouse
button. The last determination to be selected receives the focus.
￭
All determinations
With [Ctrl] [A] or by clicking on the uppermost left-hand table field all
the filtered determinations within the current set of determinations are
selected. The focus is retained.
4.5.1.8
Determination overview - Functions
Subwindow: Database
▶ Determination overview
With the determinations selected in the Determination table the following
functions can be carried out:
Editing determinations
￭
￭
￭
￭
￭
￭
￭
￭