Metrohm tiBase 1.0 Manual - Manual (Page 165)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiBase 1.0 ￭￭￭￭￭￭￭￭ 157
4.4.1.4.3.8 Report template - Group field
Program window: Database ▶ Report template
A group field is for the purpose of grouping together a variety of fields in
the report template. All of the fields gathered together in a group field can
be moved together as a group. The group field prevents a page break inside
the group field.
The group field always extends across the entire width of a page; only the
upper edge (Y value) and the height of the field can be configured.
Note
The following fields, which do not permit page break controls, cannot be
inserted into a group field.
￭ Fixed report
￭ Curve
￭ Calibration curve
Insert
In order to insert group field into a report template the corresponding sym-
bol must be selected on the Module bar and placed on the report template
by creating a field with the left-hand mouse key.
Properties
X pos.
Shows the predefined x-position for the field.
Y pos.
y-position within the permitted section.
Range 0.0000 ... (max. page height) mm
Width
Shows the predefined width of the fixed report.
Height
Height of the field
Range 0.0000 ... (max. page height) mm