Metrohm tiBase 1.0 Manual - Manual (Page 186)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
178 ￭￭￭￭￭￭￭￭ tiBase 1.0
Field separator
Selection of the field separator.
Selection ; | , | Tab
Default value ;
4.4.4.2.5 Export template - Request at file export
Dialog window: Database ▶ Tools ▶ Templates ▶ Export templates... ▶ Export tem-
plates ▶ [Properties] ▶ Export template
If in the properties of the export template under File name the option
Request on each export has been selected (see Chapter 4.4.4.2.1, page
174), then before the export of a determination the dialog File export is
displayed.
Target directory
Shows the target directory for the export file, which has been defined in the
properties of the export templates (see Chapter 4.4.4.2.1, page 174) used.
File name
Name under which the export file is to be saved în the Target directory.
During creating the file the user name as well as the current time stamp are
automatically attached to the name entered.
[OK]
The export of the corresponding determination is carried out to the indicated
file.
[Cancel]
The export of the corresponding determination is canceled. If several deter-
minations have been selected to be exported, then the dialog File export
will be displayed for the next determination.
[Cancel all]
The export of all selected determinations is canceled.
4.4.4.3 XML export
XML export
General
An XML export file with all determination data can be created when an XML
report template is used at the export of the determinations.
Structure
An XML export file is constructed as follows:
<?xml version="1.0" encod-
ing="ISO-8859-1" ?>