Metrohm 899 Coulometer - Manual (Page 175)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
13 Accessories
899 Coulometer
￭￭￭￭￭￭￭￭ 165
Order no. Description
2.803.0010 803 Ti Stand with stirrer and pump
Compact titration stand with magnetic stirrer and built-in pump for adding sol-
vent and aspirating the titration vessel content. Suitable for Karl Fischer titrations
with Titrando and 899 Coulometer. MSB connector. Including extensive acces-
sories, solvent bottle and waste bottle.
Dimensions in mm (W/H/D): 106/ 101/ 220
Dimensions remark: Height with support rod: 412 mm
2.860.0010 860 KF Thermoprep
The 860 KF Thermoprep is used for thermal sample preparation in Karl Fischer
titration. Many substances are not suitable for a direct Karl Fischer titration
because they are not soluble, react with the KF reagent or because they release
their water content only very slowly or only at high temperatures. With the aid
of tightly sealed sample vials the samples are brought to the oven and can after-
wards be determined by every volumetric or coulometric KF titrator.
Dimensions in mm (W/H/D): 440/500/230
2.885.0010 885 Compact Oven Sample Changer
The 885 Compact Oven Sample Changer is used for thermal sample preparation
in Karl Fischer titration. The samples are heated in the oven up to a temperature
of 250°C. This causes the water to vaporize and be transported with a dry car-
rier gas into a titration cell in which the analysis takes place.
6.2148.030 RS-232/USB Box
Extends the Titrino plus and the 899 coulometer by two RS-232 interfaces for
the connection of e.g. balances, PC, LIMS. Requires 6.2151.030 cable.
6.2164.500 Power Box
For the power supply to the 899 Coulometer in environments where power sup-
plies are either unstable or absent.