Metrohm 899 Coulometer User Manual
Page 56
Advertising
5.7 Sample table
■■■■■■■■■■■■■■■■■■■■■■
46
■■■■■■■■
899 Coulometer
Activating the sample table
Proceed as follows to activate the sample table (parameter Sample table
= on).
1 Opening the main menu
■
In the main dialog, select Menu and press [OK].
2 Opening the control dialog
■
Select the menu item Control and press [OK].
3 Activating the sample table
■
Select Sample table and press [OK].
■
Select the entry on in the selection list and apply with [OK].
■
Press [BACK].
The menu item Sample table is displayed in the main menu:
The sample table contains numbered lines. The identification (ID1) and
the sample size of each sample are displayed.
Advertising