Sindoh N700 - Manual (Page 103)

2-
27
Copy Features
2
3. Series
2 Sided Original → 1 Sided Copy:
1
Press [2 sided 2 sheets] in Series.
2
If the original to be set on the ARDF is 2 sided and Top to Top, press [Top to Top].
If the original to be set on the ARDF is 2 sided and Top to Bottom, press [Top to Bottom].
3
Check [1 Sided] button is pressed, and then press [OK].
4
Pressing [Back ▲] on the bottom left allows to return to Copy Start-up screen.
Flatbed Scan → 2 Sided Copy
1
Make 1 Sided → Duplex in 2 Sided Setting.
2
Hold the original on the Flatbed and scan the first sheet by pressing 【 】 Key.
Then, change the original on the Flatbed and scan the second sheet by pressing
【 】 Key.
3
For inputting more quantity, repeat the above wo processes.
4
For outputting after the scan input has been completed, press 【#】 Key.
However, no original should be on the ARDF since the original on the ARDF can be read if there
is an original on the ARDF.