Sindoh N700 - Manual (Page 238)

Setting
6-
32
Feature Description Set point
3-Speaker Mode Allways ON
* On till Connect
Off
4-Tx/Rx Alarm Transmission/Reseption alarm
setting ON
*
OFF
5-Fax Vol. Fax Sound Volume setting Set up 0~7
1-Dial
prefix
Dial Prefix setting
Dial Direct Line No. size,
Select Dial Direct Line No. setting ON
*
OFF
(Prefixed number is
not added to the
Dial No.)
Number Size It can be set up in On in Dial Direct
Line No.
Set up 0~9 (2)
Prefix
Number It can be set up in On in Dial Direct
Line No.
Input by the number key
(none)
2-Auto
Redial
If Fax transmission has not
completed successfully since Redial
setting Other Party’s Fax is under
communicating or due to other
problems,retry can be made by the
user’s setup number of the Dialing
No. Number of Retry; available for
setting up the retry interval.
*
ON
OFF
Number of
Retry Number of redial of Auto Redial can
be specified. 1~5 times (2 times)
Retry interval Interval of redial of Auto Redial can
be specified. 1~5 minutes (2 minutes)
3-Enable ECM If specified ON , part of the file not
transmitted due to line error can
be transmitted again automatically
(However, Other Party’s Fax
machine shall support this feature.).
*
ON
OFF
4-TTI Transmission data, such as current
time, can be input in the outputs. * ON
OFF