Sindoh N700 - Manual (Page 70)

Preparation for Using the Machine
1-
40
3
Close Duplex Unit or Right Cover:
4
Select Bypass Tray and then press [OK] Key.
5
Select Paper Size and then select [Envelope] in the Paper Type (see P. 6-13 Paper/Tray ).
6
Press [Check].
7
Set an envelope on the Bypass Tray as shown in the previous page (The side without pasting
must be down and the longer edge of the envelope should face the inlet of the Bypass Tray.)
8
Hold Original and then press 【 】 Key.
Paper Size Setting in Bypass Tray
Set the size and type of the paper loaded onto the Bypass Tray on the following order:
1
Press [Auto]: