Sindoh N700 - Manual (Page 330)

Appendix
10-
10
Type of
Paper
Tray Type of
Paper
to set Size of Paper to set Quantity of
Paper to set
Bypass
Tray
(MFP) Plain paper,
Thick paper A3 , B4 , A4 , B5 ,
A5 , B6 , A6
100 sheets
(A3 50
sheets)
11 ”×17” ,
LG(8½ ”×14”) ,
LT(11 ”×8½”) ,
HLT(5½ ”×8½”) ,
Executive(10½ ”×7¼”) ,
F/GL(8 ”×13”) ,
Foolscap(8½ ”×13”) ,
Folio(8¼ ”×13”) ,
Eng Quatro(8 ”×10”) ,
G/LG(8¼ ”Ч14”) ,
11 ”Ч14” ,
G LT(10½ ”Ч8”) ,
11 ”Ч15” ,
US B4(10 ”×14”) ,
US B4(10 ”×15”) ,
Postcard (100×148mm), (148×200mm),
(267×390mm), (267×195mm),
Com 10(4¼
”×9½”),
Monarch(3⅞ ”×7½”),
C5 Env.(229×162mm),
C6 Env.(114×162mm),
DL Env.(110×220mm),
(Width:90 ~ 305mm, Length:148 ~ 600mm)
(For Duplex, applied to the length up to 432mm)
- The paper that is not detected automatically needs the selection or input of the paper size. See
P. 6-13 Paper/Tray .
- When using Bypass Tray, using the paper with the length over 433mm may cause crease,
no paper feeding, or paper jam. Please set the paper correctly.
- Tracing paper(2nd original drawing paper), OHP film, postcard, or label paper should be set
one by one as possible.
- Do not exceed the upper limit mark downward from the Multi Paper Tray.
- When using Bypass Tray, Paper over A4 can be set under 50 sheets and the paper
under, A4 can be set under 100 sheets.
- When using Bypass Tray, Thick A4 paper can be set under 25 sheets and thick paper
less than A4 can be set under 50 sheets.