Cisco 7912G - Manual (Page 130)

Appendix A Reference List of Parameters
Configuration Parameters
A-8
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Configuration Parameters
This section provides information on the parameters that are used configure the
Cisco Unified IP Phones 7905G and 7912G through a profile file or through the
Phone Configuration Web Page.
Note The configuration parameters are display only on the Phone Configuration Web
Page and in the profile configuration file. One exception is encryption, which,
under certain circumstances, can be configured on the Phone Configuration Web
Page. For more information about encryption, see the
“Configuring the
Encryption Key” section on page 4-7 .
These parameters are organized into the following categories:
• Network parameters—Control various network-related activities of the
phone. See the
“Network Parameters” section on page A-8 .
• SIP Parameters—Control protocol-specific items. See the “SIP Parameters”
section on page A-15 .
• Call Preference Parameters—Control user features. See the “Call Preference
Parameters” section on page A-22 .
• Tone parameters—Control how the phone handles the various tones that it
plays, and related options. See the
“Tone Parameters” section on page A-28 .
• Audio parameters—Control how the phone handles various audio-related
activities. See the
“Audio Parameters” section on page A-32 .
Network Parameters
Table A-4 describes the network parameters that you can configure through a
phone’s profile file or through its Network Parameters web page.
Tip To access the Network Parameters area directly from a web browser, enter
IP_address/NetCfg, where IP_address is the IP address of your
Cisco Unified IP Phone.