Vertical Communications SCS 8324S - Manual (Page 108)

Other Features
98 Comdial August, 03
• To monitor another station at any time,
1. PRESS INTERCOM.
2. DIAL #03.
3. DIAL extension number of telephone to be monitored.
4. PRESS SPEAKER to end monitoring.
Your system installer may also program a dedicated SERVICE
OBSERVE button that may be used in place of the feature access
code.
7.14 Switching The Dialing Mode
(Between Pulse And Tone)
If the telephone service in your locality is pulse (rotary dialing), the
installer arranges your telephone to dial in this manner. If you need to
send tones during a dialing sequence (for example, to send bank-by-
telephone tones), you can convert to tone dialing mode while dialing.
The system will switch back to pulse dialing when you end your call.
You can store a # as part of a speed dial number to cause an auto-
matic switch from pulse to tone where needed in a number sequence.
• To convert to tone dialing at any time during dialing or while
on an active call,
—DIAL #.
7.15 IMIST Module
Impact SCS 8324F-**, 8324S-**, and 8312S-** speakerphones
equipped with the optional IMIST module can support an IST device
(modem, FAX machine, industry-standard telephone, etc.) in addition
to the LCD speakerphone. Depending on system programming, the
IST device may be used to make outgoing calls and receive incoming
calls. The functionality of the IMIST module depends on the type of
system you are using: