Vertical Communications SCS 8324S - Manual (Page 77)

GCA70250
Attendant Manual
August, 03 Comdial 67
6. PROGRAMMING
6.1 DSS Numbers
Storing another stations extension number at a DSS/BLF program-
mable location allows you to monitor that station, dial with the press
of one button, or pick up or hold calls at that station quickly and con-
veniently.
• To store an intercom number as a DSS number,
1. SELECT OPTIONS.
2. SELECT NEXT until the DSS
option appears.
3. SELECT DSS.
4. PRESS programmable button to
choose DSS/BLF button location.
5. DIAL extension number.
6. REPEAT the previous steps, OR
SELECT EXIT.
7. PRESS SPEAKER to end.
Note: Storing DSS numbers at button locations will overwrite any
previously stored numbers.
Enter Ext:
EXIT
Designating an Extension
CAUTION
Do not attempt to program interactive buttons;
doing so can cause the system to make features
unavailable. If you inadvertently program interactive
buttons, you can retrieve their functions in the following manner:
1. PRESS INTERCOM **1
2. PRESS the interactive button to be reprogrammed
3. DIAL 91, 92, or 93 (for buttons from left to right).