Vertical Communications SCS 8324S - Manual (Page 22)

Getting Started
12 Comdial August, 03
1.4 Your Speakerphone’s Display Lights
The lights (LEDs) on your LCD speakerphone indicate the status of
lines, features, and intercoms.
Busy Lamp Field (BLF) lights (next to a programmable
Direct Station Select button):
• Steady red = station is in use or in Do Not Disturb.
• Flashing red = station is receiving a call or calling you.
• Fluttering red = station-to-station messaging has been set by the
station associated with this programmable button
Next to a line button:
• Steady green = this is your line, either on-hook (in a hands-free
mode) or off-hook, when the line is active.
• Steady red = another station is using this line.
• Flashing red = a call is coming in on this line.
• Flashing orange = this line will be answered when you lift the
handset.
• Winking green = your line is on hold.
• Winking red = the call has been placed on hold by another
station.
• Fluttering green = your line has recalled from hold.
• Fluttering red = the line put on hold by another station has
recalled.
Note: You can find the programmable buttons that the installer
designates line buttons in the same location as the DSS/BLF but-
tons. Ensure that these buttons are labeled correctly to indicate
their unique features.