Vertical Communications SCS 8324S - Manual (Page 79)

GCA70250
Attendant Manual
August, 03 Comdial 69
5. CHOOSE your speed dial route from the following list:
• PRESS line button to select outside
line,
• DIAL 00 to select prime line or last
line used,
• DIAL 01 to 16 to select line
group,
• PRESS INTERCOM button or dial
8 to select intercom.
6. DIAL number (up to 16-digits long).
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all
numbers are stored, OR SELECT
EXIT.
9. PRESS SPEAKER to end.
Note: You may need a pause between numbers to compensate for
differences in response time between your system and the host sys-
tem (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host sys-
tem that needs a hookflash to access a feature, press TAP to store
a hookflash, then continue dialing.
EXIT
Preselect
Selecting Line or Intercom
SAVE BKSP EXIT
Dial Number
Dialing a Speed Number