Vertical Communications SCS 8324S - Manual (Page 88)

Other Features
78 Comdial August, 03
The feature cycle is timed and does not have busy and ring-no-answer
detection circuitry. Because of this, if you are operating handsfree
when the called party answers, you must take the handset off-hook to
prevent being cut off by the timing cycle.
You must program an AUTOMATIC REDIAL button at one of the
designated programmable button locations on their telephones before
you can use it. See the instructions on page 75 to program an AUTO-
MATIC REDIAL button.
• To use the automatic redial feature to redial a busy or
unanswered number,
1. While on the call, SELECT ARDL
OR PRESS the AUTOMATIC
REDIAL button programmed by your
installer.
2. The system repeatedly dials the num-
ber until you cancel the feature or the
system has dialed the number a pre-
programmed number of times (deter-
mined by your system installer).
3. The AUTOMATIC REDIAL light flashes between redials and turns
on steady during redialing.
4. IF your installer has enabled answer supervision on your line, the sys-
tem automatically cancels automatic redialing and turns the AUTO-
MATIC REDIAL light off.
5. IF answer supervision is NOT enabled, SELECT ARDL OR the pro-
grammed AUTOMATIC REDIAL button while on the call to cancel
automatic redialing,
The enhanced automatic dialing feature adds a multiple redial feature.
When installers enable this option, the station can have multiple
numbers queued for ARD (automatic redial). When you enable mul-
tiple ARD, a station can store up to the last 10 numbers the user dials.
L123
CONF ARDL
Initiating Auto Redial