Vertical Communications SCS 8324S - Manual (Page 115)

GCA70250
Attendant Manual
August, 03 Comdial 105
• To re-enable line,
—REPEAT the previous procedure.
8.4 Mark Problem Line
The system installer can arrange the system so that you can mark a
line that is not functioning properly.
• To mark a line,
1. Press MARK or INTERCOM.
2. Dial the installer designated code.
8.5 Message Waiting Enabling or
Disabling
You can enable or disable the message-waiting feature that was
assigned to a user through their class of service (COS) programming.
• Disable a user’s message-waiting feature,
1. PRESS INTERCOM.
2. DIAL *#0*41 7.
3. DIAL the user’s COS number.
4. DIAL # to disable the user’s message waiting feature.
5. PRESS SPEAKER to end.
• To re-enable the message-waiting feature for the originally
assigned user,
—REPEAT the previous procedure.