Vertical Communications SCS 8324S - Manual (Page 90)

Other Features
80 Comdial August, 03
7.3 Tracker Paging System
When installed with your system, the Tracker Paging System option
allows you to send call back and parked call messages to Tracker
pagers assigned to station extension numbers. Along with the parked
call message, the system parks the call in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alphanumeric or numeric-only) is dependent upon the Tracker pager
model in use at the station.
When outside callers call into a system that has both a Tracker Paging
option and a voice mail option installed, the system gives these callers
the option of either leaving a message or tracking the person that they
are calling.
If you have a Tracker pager assigned to your personal intercom
number, you can receive messages that someone else sends you. The
system automatically installs the Tracker pager for your use;
however, you can disable it when you do not wish to receive paged
messages and when you leave at the end of your day. Of course, if
you do disable your Tracker pager at the end of your day, be sure to
enable it at the beginning of your next day.
Your LCD speakerphone includes an interactive TRACK button;
however, if your day-to-day operation includes extensive Tracker
usage, such as your attendant function, the installer may include a
TRACK button at a programmable button location.
• To track a called party after receiving a ring—no answer,
1. MAKE an intercom call to someone
AND RECEIVE no answer.
2. SELECT TRACK.
3. HEAR confirmation beep (Tracker
page accepted) OR HEAR busy tone
(Tracker page not accepted).
4. PRESS SPEAKER to end.
Calling J Smith
CALLBK MSG TRACK
Initiating a Tracker Page