Vertical Communications SCS 8324S - Manual (Page 62)

Advanced Call Handling
52 Comdial August, 03
* Comdial has taken reasonable steps in the design of all product features, including
CFOS, which protect against unauthorized or fraudulent access to, or use of, a
system, or which protect against unauthorized, fraudulent or unaccounted-for access
to, or use of, long distance lines. However, no system is entirely invulnerable or
immune from unauthorized or fraudulent access or use, or unaccounted-for access or
use, and therefore Comdial disclaims any and all liability, and makes no warranty,
express or implied, relating to unauthorized or fraudulent access or use, or unac-
counted-for access or use.
4.5 Call Parking
4.5.1 PARKING A CALL
You can place a call on hold in the system so that it can be answered
from any station, even though it may not have a line appearance for
the call. You accomplish this by placing the call in one of many park
orbits, where the call remains until it is answered. Those calls that
you can park include intercom calls, outside calls, and conference
calls.
You park calls in predefined zones and then retrieve them by dialing
an intercom feature code or by pressing a preprogrammed call park
button. The system can hold 90 calls in park zones (also referred to as
orbits) where they are retrievable by all users in the system.
• To park a call in orbit,
1. While on the call, PRESS INTERCOM OR PRESS TRNS/CNF if
intercom call.
2. DIAL *.
3. DIAL code for park orbit (910 to 999 for orbit 10–99).
4. Remember the code for later use or make it known to those who need
to know it in order to retrieve the call.
• To retrieve a call that was placed on hold in the system
(parked),
1. PRESS INTERCOM.
2. DIAL #.