Vertical Communications SCS 8324S - Manual (Page 27)

GCA70250
Attendant Manual
August, 03 Comdial 17
2.3 Night Transferred Calls - Line
Answer From Any Station
You can use your attendant station to manually place the system in the
night ringing mode by dialing a code or pressing a preprogrammed
button. this mode overrides the direct, day 1, and day2 automatic
ringing modes. While this feature is active, calls on lines assigned to
delayed and night ringing both ring at the various stations. No other
ringing occurs unless the installer has arranged for a loud ringing bell
or other external ringing device to sound when calls appear on those
assigned lines during the night ringing mode. These calls may be
answered at any telephone in the system if a user dials the proper
code.
• If your telephone rings,
1. PRESS the line button with flashing light.
2. LIFT the handset to talk.
The installer can assign one or more of the four system relays to track
the ring signal on any or all lines that he or she assigns to them. The
installer can arrange for the tracked ringing to be during the direct,
delayed, day 1, day 2, or night ringing modes. Typically, the installer
wires a relay so that its contact actuation causes an external bell or
other device to sound.
You can hear this external ringer and dial a code. When you do this,
you can answer any line that the installer has assigned to that external
ringer through the relay programming.
• When you hear loud ringing anywhere in the system,
1. LIFT handset.
2. PRESS INTERCOM
3. CHOOSE ringing zone:
• DIAL 65 through 68 to select ringing zone (1-4).
• DIAL 69 to answer for any zone.