Vertical Communications SCS 8324S - Manual (Page 40)

Answering Calls
30 Comdial August, 03
2.10 Caller ID (Automatic Number
Identification)
When installed by system programming, the Caller ID feature allows
you to view incoming call numbers before you answer them.
Incoming call numbers flash in the lower half of the LCD. If you
answer the call, the number appears in the upper half of the LCD.
The system also stores numbers that ring on your line but receive no
answer. If the call has been returned by someone else, dialing the *
key reveals who returned the call. Everyone sharing your line can
scroll through the stored numbers and choose which calls to return.
• To scroll through ring-no answer numbers stored on
your system (CID light is flashing),
1. SELECT the programmed CALLER ID button on your telephone.
Your LCD will display the calling number, date, and time the call
came in. The most recent call appears first in the list.
2. SELECT the programmed CALLER ID button each time you wish to
display the next most recent ring-no answer call to your line.
3. To dial one of the numbers in the redial queue, SELECT the pro-
grammed SAVED NUMBER REDIAL button. The system will auto-
matically dial the number.
Depending on your system programming, when a call is returned it
might remain in the ring-no answer queue or the system might delete
it from the ring-no answer queue. Your system installer can tell you
how the feature is programmed. If the system is programmed to leave
a returned number in the redial queue, the display shows a *S char-
acter next to the returned numbers.
• To determine who viewed the number and returned the
call,
1. DIAL *