Vertical Communications SCS 8324S - Manual (Page 80)

Programming
70 Comdial August, 03
6.3 Feature Access Codes
In addition to the system features that you program using the inter-
active buttons, you can program several other features by using their
access codes. The feature codes are programmed like speed dial
numbers and can occupy the same programmable buttons on your
telephone. Access codes are listed in Appendix A, Feature Access
Codes found on page 123.
• To store a system feature access code,
1. SELECT OPTIONS.
2. SELECT NEXT until SDIAL option
appears.
3. SELECT SDIAL to choose speed
dial programming.
4. PRESS programmable button OR dial
pad button (0–9) to choose storage
location (remember, to access second
level storage at a programmable button, press SHIFT first).
5. PRESS INTERCOM when prompted to preselect line.
6. DIAL access code associated with
feature.
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all
numbers are stored, OR SELECT
EXIT.
9. PRESS SPEAKER to end.
• To manually store an access code,
1. PRESS INTERCOM.
2. DIAL **3.
3. PRESS programmable button.
4. DIAL access code for feature.
5. PRESS SPEAKER to end.
6. LABEL button location.
Location
EXIT
Choose a Location
Dial Number
SAVE BKSP EXIT
Dial the Access Code