Vertical Communications SCS 8324S - Manual (Page 133)

GCA70250
Attendant Manual
August, 03 Comdial 123
8.16 System Status Log
The system status log gives you information about the status of your
system. Status log entries include: system reset, parity (port number),
(port number) removed, manual reset, and software reset. Your
installer must program a SYSTEM STATUS button on your telephone
to provide you with access to the log display. The light located next to
the button serves as the SYSTEM STATUS light. If the light turns on,
it alerts you to enter the log viewing mode by pressing the SYSTEM
STATUS button.
If your system includes T1 telephone line service, your telephone
may display a T1 status log as well as the system status log. The T1
status log entries include those transmission errors that exceed their
installer-programmed thresholds.
The installer may arrange for the system to sound an external audible
alarm (or turn on an external visual alarm) if certain alarm conditions
occur with the T1 service— it is the installer’s choice whether the
external alarm is audible or visual. If a T1 alarm occurs, you must
take action to turn off the alarm device.
View the status logs by scrolling through them using the interactive
buttons on your telephone. Although you can view a status log and
turn off the T1 alarm, your installer must turn off your SYSTEM
STATUS light. After viewing a log (and also turning off the external
T1 alarm if necessary), inform the system administrator or installer
that a system status or T1 alarm condition has occurred, and describe
to him or her the displayed log details.
• To view the log,
1. PRESS the SYSTEM STATUS button (the button flashes red when
the log contains entries).
2. SELECT SYSTEM to display the most recent system status log entry,
OR SELECT T1 to display the most recent T1 log entry.
3. SELECT INFO to display the time and date of the current entry.
4. SELECT REV to display the previous entry.
5. SELECT FWD to display the next (more recent) entry.