Vertical Communications SCS 8324S - Manual (Page 38)

Answering Calls
28 Comdial August, 03
2.8 Do Not Disturb Condition
You can set your telephone to a do not disturb mode using the desig-
nated interactive or programmable button. The associated indicator
turns on as an indication of active DND and an appropriate message
appears in the display of LCD speakerphones. Under the DND con-
dition, an outside call forwards to another station according to the call
forwarding feature. An intercom number call does not ring at a DND
station and the system sends a fast busy signal to the caller to distin-
guish the DND condition from a standard busy line. No paging
announcements are received on the DND station. Even though your
station is in the DND mode, you can still make outgoing calls and
access other features.
• To enable DND, proceed as follows:
1. SELECT OPTIONS.
2. SELECT NEXT until NDN option
appears.
3. SELECT DND.
4. SELECT ON
5. SELECT EXIT.
6. PRESS SPEAKER to end.
• To disable the DND condition,
—REPEAT the above procedure,
BUT SELECT OFF instead of
ON at step 4.
Do Not Disturb
ON OFF< EXIT
Setting Do Not Disturb
Do Not Disturb
MON 24 12:35
Station with DND Set