CDI Torque SURETEST Torque Calibration System - Manual (Page 51)

CALIBRATION CHAPTER 5
5-50
6. Enter the following code into the display using the Cursor Keys: 5222
( Left / Right to select digit ; Up / Down = Increment / Decrement value ; ‘Enter’ to accept)
Calibration CW:
7. Select Calibrate CW. Press ‘ENTER’.
A warning is displayed.
Select ‘ Yes ’. Press ‘ Enter ’ .
8. Using the Up or Down Cursor keys, enter “ 1 ” for a single transducer .
Using the Up or Down Cursor keys, enter “ 4 ” for the 4-in-1 transducer.
9. Press ENTER. The display reads: