CDI Torque SURETEST Torque Calibration System - Manual (Page 59)

MANUAL LOADER CHAPTER 6
6-58
Application
The loader is a laboratory grade instrument used for testing and calibrating all torque wrenches,
drivers, torque multipliers, non-impact pneumatic and electric nut runners
Power
To activate the limit solenoids that protect the transducers from overload, the loader
requires AC power, 115/230VAC, 50 to 60 Hz, 1.0 amps.
WARNING
Do not use this equipment with the power off. Always turn on the Suretest Base Unit and
loader so the torque and load values are indicated on the display. The safety relays only
work when the power is on.
Transducer Rotation
The manual hand crank provides up to 20° of transducer rotation in both clockwise (CW) and
counter clockwise (CCW) directions.
SURETEST Torque Calibration System
Components included in System are:
• 5000-ST Base Unit (Suretest)
• 2000-600-02 Loader, and
• 2000-100-02 Roll Cabinet.
When the 2000-600-02 Manual Loader interfaces with the 5000-ST Base Unit and the
SURETEST series of torque transducers, the SURETEST Torque Calibration system provides
precision loading, monitoring and data acquisition of torque, within ± 0.25% accuracy.
System capabilities include, data storage, retrieval, statistical analysis and automatic downloading
to a printer or computer.
Torque transducers, purchased separately, are available in ranges from 15-200 in oz, to 200-2000
ft lb. The SURETEST Torque Calibration system features accessory calibration equipment
including precision torque bars, certified weights, calibration mounts and stands and torque
multipliers.
The 2000-600-02 includes a CDI roll cabinet, part number 2000-100-02, with heavy duty casters
and nine drawers with ball bearing slides for transducer and calibration equipment storage. An
extendable swivel indicator stand accepts mounting of the SURETEST Base Unit for operator
convenience.