CDI Torque SURETEST Torque Calibration System - Manual (Page 7)

6
WARNING
Risk of entanglement.
• When starting power tools, check for obstacles near your hand and anticipate the
reaction force by gripping the tool firmly.
• Do not wear loose clothing and jewelry while operating a power tool. Loose clothes
and jewelry can be caught in moving parts.
• Keep body parts away from rotating parts.
• Wear a protective hair covering to contain long hair and prevent contact with moving
parts.
• Do not overreach. Keep proper footing and balance at all times.
Entanglement can cause injury.
WARNING
Improper use can cause breakage.
• Read instructions before operating.
• Follow manufacturer’s instructions, safety precautions, and specifications when
operating tools. Broken equipment can cause injury.
WARNING
• Make sure all components, including, adaptors, extensions, drivers and sockets are rated
to match or exceed the torque or load being applied.
• Be sure the capacity of the SURETEST system matches or exceeds each application
before performing a procedure.
• Do not use the SURETEST system if it makes unusual noises, has loose parts, or shows
any other sign of damage. Have repairs performed at an Authorized Service Center
before use.
• Do not use chipped, cracked, or damaged sockets and accessories.
• Do not remove any labels. Replace any damaged label.
• Follow good, professional tool practices:
** Pull on a wrench handle ** do not push ** and adjust stance to prevent a possible
fall.
** Do not use extensions, such as a pipe, on a wrench handle.
• When using ratchets, make sure the direction lever is fully engaged in the correct
position.
• Never attempt to test an impact tool on this instrument.
• Always position the 40" arm over the front of the stand as shown. Never extend the test
arm behind the stand. The stand will tip over when weights are applied.
• Always be alert to the potential for personal injury that may be caused by excessive
torque applications, careless handling of heavy weights, and out-of-balance or unsafe
weight distribution.