Dynojet WinPEP 7 - Manual (Page 102)

WinPEP 7 User Guide
C H A P T E R 7
Graph Options
7-6
Rescale—resets the scale of the graph to standard.
UnZoom—returns the viewing area to the previous magnification.
ReZoom—returns the viewing area to the last unzoom magnification.
Black & White Mode—removes all colors from the graph to help with printing and
faxing graphs.
Reset Colors— resets the colors of the lines used to graph each run to their defaults.
Force Scaling—forces left and right vertical scales to the same value. Some graph
operations will reset this option.
Snap to Scale—Causes graph scale to display starting from even increments, such as
50 instead of 53.
Magnifier Box—lets you zoom in on a single data channel without changing the data
channels on the main graph.
Display Negative—When Display Negative is toggled on, all data is displayed. When
off, the data is cut off below zero and only positive data will be displayed.
Display—determines what will be displayed on the graph. When printing the graph,
note that the Conditions will always be printed.
Correction Factor—lets you select the correction factor applied to the data.
Smoothing—lets you select the level of smoothing to be applied to the data.
Properties—opens the Graph Options dialog box where you can customize the graph
properties. Refer to “Exploring Graph Properties” on page 7-7 for more information.