Dynojet WinPEP 7 - Manual (Page 51)

G E T T I N G S T A R T E D W I T H W I N P E P 7
The WinPEP 7 Menu Bar
Version 2 WinPEP 7 User Guide
3-17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
THE WINPEP 7 MENU BAR
The WinPEP 7 menu bar is comprised of the file, search, tools, display and help menus.
F ILE M ENU
Open—lets you browse to any directory containing run files and select files for
viewing. Open is available only in the Graph screen.
Export Graph. lets you save an image of the current graph to a file. Export Graph is
available only in the Graph screen. The following image formats are supported:
Export Data—lets you export the data used to construct the graph to a file or a
printer. Export Data is available only in the Graph screen.
Save Template. lets you save the gauges displayed on the MakeRun screen as a
template. Save Template is available only in the MakeRun screen while in Edit Mode.
Load Template. displays a previously saved template of gauges in the MakeRun
screen. Load Template is available only in the MakeRun screen.
Reopen. displays a list of recently viewed run files. Select any run file to display that
run on the graph. Reopen is available only in the Graph screen.
Remove All Runs. removes all runs currently selected on the graph. Remove All Runs
is available only in the Graph screen.
Printer Setup/Print Preview/Print. These commands are only available in the Graph
screen. These commands may be used to preview, edit, and print simple output of the
graph. Note that the Conditions will always be printed. Be sure to set the paper
orientation to landscape in the printer setup. These commands are available only in
the Graph screen.
Exit. exits WinPEP 7 from both the MakeRun and Graph screens.
S EARCH M ENU
Find Run File. opens the WinPEP Search window. This window lets you search for run
files by name, titles containing certain text, and the advanced search lets you
search by dates. This choice is only available when you are in the Graph screen. It
appears grayed-out when you are in the MakeRun screen.
Find Dyno Electronics. searches the available com ports for the dyno electronics. If
the dyno electronics is found, the correct com port is selected. If the dyno
electronics is not found, an error message will appear. Refer to “Connecting the
Dyno Electronics” on page 3-11 for more information on connecting the dyno
electronics. Find Dyno Electronics is available only in the MakeRun screen.
• JPEG, JPG
Joint Photographic Expert Group
• BMP
Windows Bitmap
• EMF
Enhanced Metafile
• WMF
Windows Metafile