Dynojet WinPEP 7 - Manual (Page 94)

WinPEP 7 User Guide
C H A P T E R 6
MakeRun Options
6-24
T ORQUE C ELL C ALIBRATION
Select Tools ! MakeRun Options ! Torque Cell Calibration to begin Torque Cell
Calibration. Refer to Appendix A for more information.
Figure 6-22: Torque Cell Calibration
A NALOG C ONFIGURATION
Select Tools ! MakeRun Options ! Analog Configuration to open the Analog
Configuration dialog box. Refer to Appendix D for more detailed information.
Figure 6-23: Analog Configuration