Dynojet WinPEP 7 - Manual (Page 138)

WinPEP 7 User Guide
A P P E N D I X E
Advanced Breakout Board
E-8
S ETTING G AUGES T IED TO O FF
To turn off the use of tied gauges, click to remove the check from the box to the left of
Gauges Tied. Speed Balance must be turned off in order to turn of Gauges Tied.
When the gauges are not tied, the drum speed or braking percentage for one dyno
drum can be controlled separately from the other dyno drum. Do not use this feature
unless you fully understand its consequences!
Speeding or slowing one set of car tires more rapidly than the other may cause
serious damage to your vehicle.
Figure E-6: Turning Off Tied Gauges
Click OK to exit the Advanced Brake Controller screen and save your settings. Click
Cancel to exit the without saving.
click to unselect
gauges tied